Upstart Epoxy Specs — Coverage Rates, Mix Ratios & Prices
Upstart Epoxy epoxy products compared: published coverage rates, mix ratios, thickness caps, recoat windows and official prices — every figure cited with a Last Verified date.
Quick answer
Upstart Epoxy sells 2 epoxy products, with published coverage figures from 12.8 to 25.7 sq ft/gal. Every figure below traces to an official Upstart Epoxy source; anything unpublished is marked rather than estimated.
Manufacturer datasheet · 2026-11-06Upstart Epoxy publishes no coverage chart — a fact we state rather than paper over. Where a brand omits the number, this site applies the labeled theoretical baseline (the 1604 rule) instead of inventing one, and the spec tables below carry everything the brand does publish: mix ratios, thickness caps, recoat windows and prices, each with its source.
Upstart Epoxy Upstart Table Top Epoxy
Published coverage (status column shows published vs derived-from-official-calculator):
| Coat / basis | Thickness | Rate | Status |
|---|---|---|---|
| flood coat (calculator basis) | 0.125" | 12.8 sq ft/gal | derived — official calculator example 96×48 @1/8" → 2.49 gal → 12.8 sq ft/gal @1/8" (derived from official formula, seal 1/16" + flood 1/8" double-coat tutorial) |
| seal coat (calculator basis) | 0.0625" | 25.7 sq ft/gal | derived — seal coat at 1/16" → 25.7 sq ft/gal (derived) |
No published sq-ft chart; figures derived from the brand's own official calculator, marked derived.
Specs (official sources):
| Spec | Value |
|---|---|
| Mix ratio | 1:1 by volume — Official FAQ: sides differ in weight — measure by volume, never weigh. |
| Recommended coat | 0.125" |
| Max single pour | 0.125" |
| Recoat window | 4–6 h tacky cure for the next 1/8" layer; fully cured → sand 220 grit first |
| Price | $94.99 per 1 gal kit ($94.99/gal) — official product page variants (checkout source; sale price, regular $141.99) (dual) |
| Typical uses | table tops, bars, wood finishes, artwork |
Upstart Epoxy Upstart Deep Pour Epoxy
Coverage: No coverage figures (volume casting resin; official calculator is volume-based).
Specs (official sources):
| Spec | Value |
|---|---|
| Mix ratio | 2:1 by volume |
| Recommended coat | 2" |
| Max single pour | 2" — 2" nominal per pour; 1.5" for large pours |
| Recoat window | ~24 h tacky cure for the next 2" layer; fully cured → sand 220 grit + wipe |
| Price | $149.99 per 1.5 gal kit ($99.99/gal) — official product page variants (checkout source; sale price, regular $267.99) (dual) |
| Typical uses | river tables, deep casting, encapsulations |
Sources & verification
Captured 2026-11-06. WAF-protected pages were read from official archived snapshots or the brands' own Shopify/Zendesk endpoints — every quote still traces to an official Upstart Epoxy channel, with the access route noted where relevant. Full per-verbatim collection records live in this site's data file.
- https://www.upstartepoxy.com/products/epoxy-resin-table-top
- https://www.upstartepoxy.com/pages/epoxy-calculator
- https://www.upstartepoxy.com/products/deep-pour-epoxy-resin
Use the numbers
- Coverage calculator — pick the Upstart Epoxy product, enter your area, get gallons with this rate.
- Cost calculator — the same job priced against every other brand.
- Mix ratio calculator — exact Part A/B splits at 1:1.
How to read these tables
Three habits make spec sheets comparable instead of confusing. First, read the coverage rows before the price rows: a cheaper per-gallon price on a product that covers less ground can be the more expensive pour, and the calculator above is the honest tiebreaker. Second, treat the thickness caps as hard limits, not suggestions — a coating product pushed into casting depth fails from the inside out, by heat, hours after the pour looked fine. Third, check the recoat window against your actual schedule: a 3-hour window means the second coat goes on the same afternoon or not at all without sanding, and a day-long deep-pour window means a weekend, not an evening. Every value above keeps its source and verification mark so those trade-offs can be argued with data — and where a row reads "(to be verified)", it means the brand does not publish the figure, not that we skipped it.
FAQ
What coverage does Upstart Epoxy publish?
The published figures are in the tables below with their sources — use them for Upstart Epoxy products before the theoretical baseline. The [coverage calculator](/epoxy-coverage-calculator) switches rates automatically when you pick a Upstart Epoxy product.
Where do these Upstart Epoxy specifications come from?
Every figure is captured from Upstart Epoxy's own published material — official product pages, TDS documents and help-center articles — with the source link shown under each table and a Last Verified date (2026-11-06). Where the same figure appears on two official pages it is marked dual-verified.
Is Upstart Epoxy the best epoxy for my project?
Size the project first — area and thickness through the [coverage calculator](/epoxy-coverage-calculator) — then compare candidates on the specs that matter for your job: max coat thickness for builds, recoat window for schedules, and the price per gallon from the [cost calculator](/epoxy-cost-calculator). "Best" without a project is marketing.
All brands
