Stone Coat Countertop Epoxy Specs — Coverage Rates, Mix Ratios & Prices
Stone Coat Countertop epoxy products compared: published coverage rates, mix ratios, thickness caps, recoat windows and official prices — every figure cited with a Last Verified date.
Quick answer
Stone Coat Countertop sells 2 epoxy products, with published coverage figures from 20 to 20 sq ft/gal. Every figure below traces to an official Stone Coat Countertop source; anything unpublished is marked rather than estimated.
Manufacturer datasheet · 2026-11-06Stone Coat Countertop is one of the brands that publishes real coverage figures — (see the tables below). That matters more than any marketing line: a published rate converts your square footage into gallons deterministically, and every figure below is quoted from the brand's own pages with the source shown. Run your area through the coverage calculator and the rate column does the rest.
Stone Coat Countertop Stone Coat Countertop Epoxy (original)
Published coverage (status column shows published vs derived-from-official-calculator):
| Coat / basis | Thickness | Rate | Status |
|---|---|---|---|
| flood coat (calculator basis) | — | 20 sq ft/gal | published (dual) |
Published as a calculator formula, not a thickness-tagged chart — displayed in tables but the calculator falls back to the theoretical rate at explicit thicknesses.
Specs (official sources):
| Spec | Value |
|---|---|
| Mix ratio | 1:1 by volume |
| Recommended coat | 0.125" |
| Recoat window | (to be verified) |
| Price | $126.13 per 1 gal kit ($126.13/gal) — official Shopify product JSON (checkout source, 2026-11-07; matches July snapshot) (dual) |
| Typical uses | countertops, tabletops, bar tops, butcher block, refinishing tile/laminate/marble |
Stone Coat Countertop Woodshop Epoxy Ultra Deep Pour
Coverage: No coverage figures published (volume casting resin).
Specs (official sources):
| Spec | Value |
|---|---|
| Mix ratio | 2:1 by volume |
| Recommended coat | 3" |
| Max single pour | 3" — up to 3" per layer in molds with minimum 1.5" per layer; step pours to 8" in small molds at gel stage |
| Recoat window | next layer at gel stage, 17–22 hours (firm but tacky — no sanding) |
| Price | $186.55 per 1.5 gal kit ($124.37/gal) — official Shopify product JSON (checkout source, 2026-11-07) (single) |
| Typical uses | river tables, encapsulations, deep molds, large castings |
Sources & verification
Captured 2026-11-06. WAF-protected pages were read from official archived snapshots or the brands' own Shopify/Zendesk endpoints — every quote still traces to an official Stone Coat Countertop channel, with the access route noted where relevant. Full per-verbatim collection records live in this site's data file.
- https://stonecoatcountertops.com/products/countertop-epoxy
- https://stonecoatcountertops.com/products/countertop-epoxy.json
- https://stonecoatcountertops.com/products/woodshop-epoxy-ultra-deep
- https://stonecoatcountertops.com/products/woodshop-epoxy-ultra-deep.json
Use the numbers
- Coverage calculator — pick the Stone Coat Countertop product, enter your area, get gallons with this rate.
- Cost calculator — the same job priced against every other brand.
- Mix ratio calculator — exact Part A/B splits at 1:1.
How to read these tables
Three habits make spec sheets comparable instead of confusing. First, read the coverage rows before the price rows: a cheaper per-gallon price on a product that covers less ground can be the more expensive pour, and the calculator above is the honest tiebreaker. Second, treat the thickness caps as hard limits, not suggestions — a coating product pushed into casting depth fails from the inside out, by heat, hours after the pour looked fine. Third, check the recoat window against your actual schedule: a 3-hour window means the second coat goes on the same afternoon or not at all without sanding, and a day-long deep-pour window means a weekend, not an evening. Every value above keeps its source and verification mark so those trade-offs can be argued with data — and where a row reads "(to be verified)", it means the brand does not publish the figure, not that we skipped it.
FAQ
What coverage does Stone Coat Countertop publish?
The published figures are in the tables below with their sources — use them for Stone Coat Countertop products before the theoretical baseline. The [coverage calculator](/epoxy-coverage-calculator) switches rates automatically when you pick a Stone Coat Countertop product.
Where do these Stone Coat Countertop specifications come from?
Every figure is captured from Stone Coat Countertop's own published material — official product pages, TDS documents and help-center articles — with the source link shown under each table and a Last Verified date (2026-11-06). Where the same figure appears on two official pages it is marked dual-verified.
Is Stone Coat Countertop the best epoxy for my project?
Size the project first — area and thickness through the [coverage calculator](/epoxy-coverage-calculator) — then compare candidates on the specs that matter for your job: max coat thickness for builds, recoat window for schedules, and the price per gallon from the [cost calculator](/epoxy-cost-calculator). "Best" without a project is marketing.
All brands
